Keitiklis ir ausinių stiprintuvas X1

299 €
Headphone listening is an intimate sonic experience and most enthusiasts employ headphone amplifiers and a good pair of ‘phones– like the ADL H118! The headphone amplifier determines the quality of sound in hand with the headphones. The X1 is small, discrete but highly specified with inputs supporting iOS digital at up to 16/48 via APPLE MFI certified USB Cable for iPod, iPhone, iPad devices. The X1 also runs 24/192 SPDIF with high-resolution files from PC via the PC’s USB output. There’s an analog line-level 4-pin 3.5mm input and a 4-pin 3.5mm output for headphones in the 12~600 ohm range. The 4-pin input supports 3.5mm Remote and Mic Earphones. The 3.5mm TOSLINK optical output delivers USB source signal up to 24/192. There’s a convenient GND TRRS switch making it easy to change from one 4-pin set of ‘phones to another.

Techninė specifikacija:

Gold-plated 3.5mm input connector
Analog line input (switched)

Gold-plated 3.5mm output connector-1
Headphone or Analog out

Gold-plated 3.5mm output connector-2
Headphone / Analog out or 3.5mm optical output for 24/192 (MAX) SPDIF

Max headphone output at 1%THD @ 1KHz
34mW(12 ohm), 60mW(16 ohm), 82mW(32 ohm), 86mW(56 ohm), 36mW(300 ohm), 19mW(600 ohm)

Channel separation 60~64dB (1KHz)
33ohms -50dB/<=±3dB

Frequency characteristics
20Hz~20kHz (±0.5dB)

Total Harmonic Distortion
0.033% (33ohms) , <0.02% (300ohms) , 0.0085% (600ohms)/1mW

S/N Ratio
95.5dB/32ohms , 98.1dB/56ohms , 101.6dB/300ohms, 102.1dB/600ohms

Charge time
approximately 7 hours (DC 5V 0.5A USB bus power)

Music playback time
up to 7.5 hours when fully charged

Dimensions
68 (W) x 118 (D) x 16.5 (H) mm

Weight
147g Approx.

Keitiklis ir ausinių stiprintuvas X1

299 €